Elite Vertical Louver

All Infills Available in Panels, Swing Gates, and Slide Gates

The PalmSHIELD Elite Aluminum Vertical Louvered Panel is a patent-pending, all-aluminum equipment screen made of vertical aluminum angle louvers set in a staggered, chevron-style pattern. It conceals HVAC units, generators, transformers, and trash enclosures while letting air move freely through the panel.

Vertical Lines, Engineered Airflow

The vertical louvers are 1-1/2" × 1-1/2" aluminum angles turned to form a continuous zigzag across the width of the panel. Each angle breaks up the sightline of the one beside it, so the equipment behind is hard to see head-on. Meanwhile, air passes between the louvers from top to bottom. The strong vertical rhythm suits modern architecture, adds visual height, and contrasts well with the horizontal lines of a building. The infill, frame, and posts are all aluminum, so the panel is non-combustible and will not rust.

Aluminum Vertical Louvered Panel Specifications

Infill1-1/2" × 1-1/2" × 1/8" aluminum angle vertical louvers (6061-T6)
Louver patternStaggered chevron (zigzag) layout in plan view
Stiffeners1/4" × 1" aluminum flat bar ribs, 2'-0" maximum on center
Infill retainer1/4" aluminum flat bar
Edge fillers1/4" × 1" aluminum flat bar gap fillers at each side of the frame
FrameAluminum vertical compression channel frame with 3" × 4" × 1/8" aluminum top and bottom caps
Panel widthCustom; 60″ typical, 48″ typical for panel heights above 10′
Panel heightCustom to project
FinishPPG Peridium TGIC polyester powder coat, custom colors

Built on the PalmSHIELD Elite Picture-Frame System

  • Structural picture frame: Every panel is fully enclosed in a patent-pending aluminum compression channel frame with aluminum top and bottom caps.
  • Adjustable installation: Panels adjust vertically and horizontally to follow grade changes and minor post-spacing variations.
  • Engineered I-Beam posts: Patent-pending 4" × 3" aluminum I-Beam posts with a removable flange and no exposed fasteners. The posts are surface-mounted on 10" × 10" × 3/4" aluminum base plates.
  • Finish and warranty: PPG polyester powder coat tested to ASTM D3363 (2H), ASTM D2794 (160 in-lb), and ASTM B117 (1,000+ hours), backed by a 20-year limited warranty against rust, peeling, and blistering.

Common Applications

  • HVAC and condenser screening
  • Generator and transformer enclosures
  • Dumpster and trash enclosures
  • Pool equipment enclosures
  • Architectural screen walls on modern commercial buildings
What is a vertical louvered equipment screen?

A vertical louvered screen uses upright louvers instead of horizontal blades. On the PalmSHIELD Elite panel, aluminum angle louvers are staggered in a chevron pattern so they hide equipment while air passes between them.

Should I choose vertical or horizontal louvers?

Both conceal equipment and allow ventilation, so the choice is mainly architectural. Vertical louvers add a sense of height and a modern rhythm. Horizontal louvers, like the Elite Aluminum Louvered Blade, echo a building’s horizontal lines and offer a published 51% open area with 100% direct visual screening.

Is the Vertical Louvered Panel all aluminum?

Yes. The louvers, ribs, frame, and posts are all aluminum and finished in a polyester powder coat, so the panel is rustproof and non-combustible.

Downloadable Files

Custom Color
Standard Black
Traffic Grey
Dusty Grey
Silk Grey
Grey White
Pure White
Grey Beige
Architectural Bronze
Water Blue
Water Blue
Violet Blue
Violet Blue
Vermilion
Vermilion
Traffic Purple
Traffic Purple
Signal Yellow
Signal Yellow
Signal Black
Signal Black
Purple Red
Purple Red
Pebble Grey
Pebble Grey
Olive Grey
Olive Grey
Ochre Brown
Ochre Brown
Light Grey
Light Grey
Maize Yellow
Maize Yellow
Moss Grey
Moss Grey
Light Blue
Light Blue
Green Brown
Green Brown
Emerald Green
Emerald Green
Copper Brown
Copper Brown
Brilliant Blue
Brilliant Blue