Tiger Slide Gates
Quick Downloads
Quote This Product ❯
Tiger Slide Gates
The PalmSHIELD Tiger series incorporates a much larger structural framework, unlike standard cantilever slide gates. The vertical framework begins with a 4” x 2” tubular outer framework encapsulating a 3” x 3” interior angle or 2” x 3” tubular U-shaped picture frame. This is an industrial and commercial gate design when aesthetics are critical. The Tiger series utilizes a upper single or double track design based on the weight and length of the opening. The bottom guide is no less than a 5” x 2” tubular member supporting the gate against wind load. PalmSHIELD Tiger commercial and industrial slide gates provide a wide array of PalmSHIELD infill options including composite wood, vinyl, aluminum, louvers, perforated and wire mesh. The architectural infill panels are installed into the cantilever slide gate to provide continuity with adjoining screen fencing. Unlike any other commercial slide gate manufacture, PalmSHIELD Tiger commercial slide gates are sweep blasted and powder coated. We offer an endless number of colors.
Additional Information
SLIDE GATE SPECS
Widths: Standard widths are 10’, 12’, 16’ & 20’. However, we offer unlimited opening sizes based on our engineering.
Heights: Standard heights are 6’, 8’, & 10’. However, we offer unlimited heights sizes based on our engineering.
Counterbalance: On cantilever slide gates, it is equal to half the opening width. On overhead and ground track systems, add 10% to the opening width.
Frame: All of our gates are engineered to your type, size and width.
Product Spec Download:
Applications:
Rooftop enclosures, Trash enclosures, Mechanical equipment, Equipment enclosures, Patios, HVAC Screens, Generators, Transformers, Pool equipment, Courtyards, & MORE!
Material Composition:
Aluminum, Composite, Vinyl, Galvanized or Stainless Steel
-
- Custom Color
-
- Standard Black
-
- Traffic Grey
-
- Dusty Grey
-
- Silk Grey
-
- Grey White
-
- Pure White
-
- Architectural Bronze
-
- Grey Beige
*Custom colors that CANNOT be matched to “RAL” and that will need to be custom made, come with their own lead times from our vendor. Prices will increase depending on the type of color and bonding needed to achieve the requested color.